# Otty fish integration — payload (sourced from config.fish managed block)
#
# Idempotent: re-sourcing in the same shell is a no-op. `return` (not `exit`)
# so non-interactive fish that sources config.fish isn't killed.
set -q __otty_loaded; and return
set -g __otty_loaded 1

# Guard: only for interactive shells.
status is-interactive; or return

# ── Bundled `otty` on PATH ──
# Mirror of the bash/zsh logic: if "Install CLI" hasn't been run, the host
# passes the bundled binary's bin dir via $OTTY_BIN_DIR. fish_user_paths is
# the right level to prepend (won't fight the user's own PATH setup).
if test -n "$OTTY_BIN_DIR" -a -d "$OTTY_BIN_DIR"
    if not contains -- "$OTTY_BIN_DIR" $PATH
        set -gx PATH "$OTTY_BIN_DIR" $PATH
    end
end

set -g __otty_cmd_executed ""
set -g __otty_progress_active ""

# Match command line against $OTTY_PROGRESS_COMMANDS (pipe-separated list of
# whitespace-delimited prefixes, e.g. "git push").
function __otty_progress_match
    set -l cmd $argv[1]
    test -z "$OTTY_PROGRESS_COMMANDS"; and return 1
    # Strip leading `NAME=value` env assignments.
    while string match -rq '^[A-Za-z_][A-Za-z0-9_]*=.* .*$' -- $cmd
        set cmd (string replace -r '^[^ ]+ +' '' -- $cmd)
    end
    for p in (string split '|' -- $OTTY_PROGRESS_COMMANDS)
        test -z "$p"; and continue
        if test "$cmd" = "$p"
            return 0
        end
        if string match -q "$p *" -- $cmd
            return 0
        end
    end
    return 1
end

function __otty_prompt_start --on-event fish_prompt
    # Capture $status immediately — it holds the previous command's exit code.
    set -l last $status
    if test -n "$__otty_cmd_executed"
        printf '\e]133;D;%d\a' $last
    end
    if test -n "$__otty_progress_active"
        if test $last -eq 0
            printf '\e]9;4;5;0\a'
        else
            printf '\e]9;4;2\a'
        end
        set -g __otty_progress_active ""
    end
    printf '\e]133;A\a'
    set -g __otty_cmd_executed ""
end

function __otty_prompt_end --on-event fish_prompt
    printf '\e]133;B\a'
end

function __otty_preexec --on-event fish_preexec
    printf '\e]133;C\a'
    set -g __otty_cmd_executed 1
    if __otty_progress_match "$argv[1]"
        printf '\e]9;4;3\a'
        set -g __otty_progress_active 1
    end
end

# ── OSC 7 CWD reporting ──
function __otty_cwd_report --on-variable PWD
    printf '\e]7;file://%s%s\a' (hostname) $PWD
end
# Emit initial CWD.
printf '\e]7;file://%s%s\a' (hostname) $PWD

# ── Dump resolved $PATH for the autocomplete engine ──
# The app process inherits only the bare launchd PATH (/usr/bin:/bin:…);
# the completion engine reads this dump to scan the user's real PATH
# (Homebrew/cargo/mise/…) for command-name completion. Once-only — PATH is
# captured after config.fish has finished setting it up.
function __otty_dump_path --on-event fish_prompt
    set -q __otty_path_dumped; and return
    set -g __otty_path_dumped 1
    set -l tmpdir $TMPDIR
    test -n "$tmpdir"; or set tmpdir /tmp
    set -l dump "$tmpdir/otty-path-"(id -u)
    string join ':' $PATH >$dump 2>/dev/null
end

# ── Omit `otty` prefix + custom aliases (deferred to first prompt) ──
# These wrapper functions must be installed AFTER the user's config.fish so
# otty's wrappers win over same-named functions defined there, and so the
# allow_overwrite sentinel can actually replace a user's existing definition.
# But when auto-loaded from vendor_conf.d we run BEFORE config.fish — so defer
# the whole block to the first fish_prompt (mirrors the zsh deferred-precmd
# load). On the managed-block path (tmux) we're already sourced at the end of
# config.fish, where ordering is fine; deferring there is harmless.
function __otty_install_wrappers --on-event fish_prompt
    # One-shot: only the first prompt installs the wrappers.
    set -q __otty_wrappers_done; and return
    set -g __otty_wrappers_done 1

# Install `edit`/`view`/`watch`/`jump`/`learn` wrappers ONCE; each one stat()s the
# omit_prefix sentinel under $OTTY_FLAGS_DIR at call time so the Settings
# toggle takes effect immediately, without waiting for the next prompt
# event. Sentinel absent → fall through to `command <name>` so PATH lookup
# behaves exactly as if the wrapper weren't there (system `watch` on Linux
# still works). By default, names already defined as user functions are
# left untouched; the `allow_overwrite` sentinel (evaluated at shell init
# — restart the shell for the toggle to take effect) opts into replacing
# them.
function __otty_should_wrap
    if test -n "$OTTY_FLAGS_DIR" -a -f "$OTTY_FLAGS_DIR/allow_overwrite"
        # `alias` in fish is implemented as a function of the same name, so
        # removing the function covers both. Erase first so our wrapper wins.
        functions -q $argv[1]; and functions -e $argv[1]
        return 0
    end
    functions -q $argv[1]; and return 1
    return 0
end
__otty_should_wrap edit; and function edit
    if test -n "$OTTY_FLAGS_DIR" -a -f "$OTTY_FLAGS_DIR/omit_prefix"
        command otty edit $argv
    else
        command edit $argv
    end
end
__otty_should_wrap view; and function view
    if test -n "$OTTY_FLAGS_DIR" -a -f "$OTTY_FLAGS_DIR/omit_prefix"
        command otty view $argv
    else
        command view $argv
    end
end
__otty_should_wrap watch; and function watch
    if test -n "$OTTY_FLAGS_DIR" -a -f "$OTTY_FLAGS_DIR/omit_prefix"
        command otty watch $argv
    else
        command watch $argv
    end
end
__otty_should_wrap jump; and function jump
    if test -n "$OTTY_FLAGS_DIR" -a -f "$OTTY_FLAGS_DIR/omit_prefix"
        # Zoxide-style: resolve only, then `builtin cd` locally — keeps the
        # transcript silent (no echoed `cd '<path>'` from line-discipline,
        # no duplicate prompt after CLI exits).
        if test (count $argv) -eq 0
            # No-args: toggle between $HOME and the last jump-source dir.
            # Local-only state ($OTTY_JUMP_PREV) so up-arrow still recalls
            # the user's literal `jump` invocation, not an injected `cd`.
            if test "$PWD" = "$HOME" -a -n "$OTTY_JUMP_PREV"
                set -l _otty_dest "$OTTY_JUMP_PREV"
                set -g OTTY_JUMP_PREV "$PWD"
                builtin cd -- "$_otty_dest"
            else
                set -g OTTY_JUMP_PREV "$PWD"
                builtin cd -- "$HOME"
            end
            return
        end
        set -l _otty_p (command otty jump --no-cd $argv); or return
        if test -n "$_otty_p"
            set -g OTTY_JUMP_PREV "$PWD"
            builtin cd -- $_otty_p
        end
    else
        command jump $argv
    end
end
__otty_should_wrap learn; and function learn
    if test -n "$OTTY_FLAGS_DIR" -a -f "$OTTY_FLAGS_DIR/omit_prefix"
        command otty learn $argv
    else
        command learn $argv
    end
end
# `watch:<agent>` — wait for a Claude/Codex/OpenCode session to reach
# idle. The colon is part of the command name as far as the shell is
# concerned, so the bare `watch` wrapper above never catches it; install
# one wrapper per agent. Keep in sync with WATCH_AGENTS in cli/src/main.rs.
for __otty_a in claude codex opencode
    if __otty_should_wrap "watch:$__otty_a"
        eval "function watch:$__otty_a
            if test -n \"\$OTTY_FLAGS_DIR\" -a -f \"\$OTTY_FLAGS_DIR/omit_prefix\"
                command otty watch:$__otty_a \$argv
            else
                command watch:$__otty_a \$argv
            end
        end"
    end
end
set -e __otty_a

# ── Custom CLI aliases ($OTTY_CLI_ALIASES = "name=cmd|name=cmd|…") ──
if test -n "$OTTY_CLI_ALIASES"
    for __otty_pair in (string split '|' -- $OTTY_CLI_ALIASES)
        test -z "$__otty_pair"; and continue
        set -l __otty_name (string split -m1 '=' -- $__otty_pair)[1]
        set -l __otty_cmd  (string split -m1 '=' -- $__otty_pair)[2]
        test -z "$__otty_name" -o -z "$__otty_cmd"; and continue
        string match -rq '^[A-Za-z_][A-Za-z0-9_]*$' -- $__otty_name; or continue
        string match -rq '^[A-Za-z_][A-Za-z0-9_]*$' -- $__otty_cmd;  or continue
        __otty_should_wrap $__otty_name; or continue
        # Use eval to bake the captured $__otty_cmd into the function body so
        # later changes to the local var can't leak into the wrapper.
        # When the alias maps to a wrapped command (jump/edit/view/watch/
        # learn), delegate to the wrapper function so its `--no-cd` /
        # builtin-cd logic still runs. Calling `command otty $cmd` directly
        # would bypass the wrapper and re-introduce the visible
        # `cd '<path>'` echo plus a spurious shell-history entry.
        switch $__otty_cmd
            case jump edit view watch learn
                eval "function $__otty_name; $__otty_cmd \$argv; end"
            case '*'
                eval "function $__otty_name; command otty $__otty_cmd \$argv; end"
        end
    end
    set -e __otty_pair
    set -e __otty_name
    set -e __otty_cmd
end

    functions -e __otty_should_wrap
end

# ── SSH Integration ──
if test "$OTTY_SSH_INTEGRATION" = "1"
    function ssh --wraps=ssh
        set -l _otty_term "xterm-256color"
        set -l _otty_opts \
            -o "SetEnv=COLORTERM=truecolor TERM_PROGRAM=otty" \
            -o "SendEnv=COLORTERM TERM_PROGRAM TERM_PROGRAM_VERSION"

        # ── Resolve hostname via ssh -G ──
        set -l _otty_user ""
        set -l _otty_hostname ""
        for _line in (command ssh -G $argv 2>/dev/null)
            set -l _parts (string split " " -- $_line)
            switch $_parts[1]
                case "user"
                    set _otty_user $_parts[2]
                case "hostname"
                    set _otty_hostname $_parts[2]
            end
            if test -n "$_otty_user" -a -n "$_otty_hostname"
                break
            end
        end

        set -l _otty_target "$_otty_user@$_otty_hostname"
        set -l _otty_tmpdir (set -q TMPDIR; and echo $TMPDIR; or echo /tmp)
        set -l _otty_meta_file "$_otty_tmpdir/otty-ssh-shell-"%self".meta"
        set -l _otty_ctl_path ""

        if test -n "$_otty_hostname"
            # Always set up a ControlMaster socket so the main connection
            # can be reused for SFTP/exec by the file/git panels.
            # ControlPath must stay short: macOS caps Unix-domain socket
            # paths at 104 bytes and $TMPDIR (/var/folders/...) already eats
            # ~49 of them, so the socket goes directly under /tmp instead.
            # mktemp -d yields a fresh 0700 dir, keeping this race-free.
            set -l _otty_ctl_dir (mktemp -d /tmp/otty-ssh.XXXXXX 2>/dev/null; or echo "/tmp/otty-ssh."%self)
            set _otty_ctl_path "$_otty_ctl_dir/socket"
            set _otty_opts $_otty_opts \
                -o "ControlMaster=auto" \
                -o "ControlPath=$_otty_ctl_path" \
                -o "ControlPersist=60"

            # Terminfo install (cached per user@host)
            set -l _otty_cache_dir "$_otty_tmpdir/otty-terminfo-cache"
            command mkdir -p "$_otty_cache_dir" 2>/dev/null
            set -l _otty_cache_file "$_otty_cache_dir/$_otty_target"

            if test -f "$_otty_cache_file"
                set _otty_term (set -q TERM; and echo $TERM; or echo "xterm-256color")
            else if command -v infocmp >/dev/null 2>&1
                set -l _otty_terminfo (infocmp -0 -x 2>/dev/null)

                if test -n "$_otty_terminfo"
                    if echo "$_otty_terminfo" | command ssh \
                        -o "ControlMaster=yes" \
                        -o "ControlPath=$_otty_ctl_path" \
                        -o "ControlPersist=60" \
                        $argv \
                        'command -v tic >/dev/null 2>&1 || exit 1; mkdir -p ~/.terminfo 2>/dev/null; tic -x - 2>/dev/null && exit 0; exit 1' \
                        2>/dev/null
                        set _otty_term (set -q TERM; and echo $TERM; or echo "xterm-256color")
                        command touch "$_otty_cache_file"
                    end
                end
            end

            printf 'user=%s\nhostname=%s\nsocket=%s\n' $_otty_user $_otty_hostname $_otty_ctl_path > "$_otty_meta_file" 2>/dev/null
        end

        # Notify Otty we're entering an SSH session.
        printf '\e]7;ssh://%s\a' (test -n "$_otty_hostname"; and echo $_otty_hostname; or echo "unknown")

        TERM=$_otty_term command ssh $_otty_opts $argv
        set -l _ret $status

        command rm -f "$_otty_meta_file" 2>/dev/null

        # Restore local CWD reporting.
        printf '\e]7;file://%s%s\a' (hostname) $PWD
        return $_ret
    end
end
